Industrial valves - Ball valves - 2-way - Lug type
Manometer gauge valve acc. to DIN 16270 - steel", male thread x sleeve
Manometer gauge valve acc. to DIN 16270 -steel, male thread x sleeve, PN 400, Tmax= up to 120°C, body: steel-1.0460, stem: stainless steel-1.4104, stem sealing: Graphite, handwheel: Bakelite
Manometer gauge valve acc. to DIN 16271 - steel", male thread x sleeve
Manometer gauge valve acc. to DIN 16271 -steel, male thread x sleeve, PN 400, T= -10° up to 120°C, body: steel-1.0460, stem: stainless steel-1.4104, stem sealing: Graphite, handwheel: Bakelitewith test connector M20x1, 5
Manometer gauge valve acc. to DIN 16271 - steel", male thread x sleeve
Manometer gauge valve acc. to DIN 16271 -steel, male thread x sleeve, PN 400, T= -10° up to 120°C, body: steel-1.0460, stem: stainless steel-1.4104, stem sealing: Graphite, handwheel: Bakelitewith test flange 60 x 25 mm
Needle valve - steel, female/female
Needle valve -steel -female/female, straightway form, Tmax=350°C ( Please note: T > 50°C - pressure reduction), seat diameter: 4 mm, body: carbon steel, stem: stainless steel-1.4104, stem sealing: graphite, handwheel: plastic
2-way ball valve - steel, PN 140, female/female
2-way ball valves -steel -female/female, full bore, 3- piece design, T= -10 up to 150°C, threaded end connections acc. to DIN 2999, body: steel-A216-WCB, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE, handlever: stainless steel
2-way ball valve - steel, PN 140, butt weld
2-way ball valves -steel -butt weld, full bore, 3- piece design, T= -10 up to 150°C, butt weld ANSI B16.25, body: steel-A216-WCB, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE, handlever: stainless steel
Swing type check valve - wafer type, steel / EPDM
Swing type check valves -wafer type -Steel / EPDM, T= -10°C up to max. 120°C, to be mounted between flanges acc. to DIN PN 10/16, body: carbon steel (zinc-plated), disc: carbon steel (zinc-plated), seals: EPDM
Swing type check valve - wafer type, steel / NBR
Swing type check valves -wafer type -Steel / NBR, T= -10°C up to max. 90°C, to be mounted between flanges acc. to DIN PN 10/16, body: carbon steel (zinc-plated), disc: carbon steel (zinc-plated), seals: NBR
Swing type check valve - wafer type, steel / seat metal to metal
Swing type check valves -wafer type -Steel / seat metal to metal, T= -10°C up to max. 300°C, to be mounted between flanges acc. to DIN PN 10/16, body: carbon steel (zinc-plated), disc: stainless steel 1.4408/1.4581, seat: metal to metal
Swing type check valve - wafer type, steel / FKM
Swing type check valves -wafer type -Steel / FKM, T= -10°C up to max. 150°C, to be mounted between flanges acc. to DIN PN 10/16, body: carbon steel (zinc-plated), disc: carbon steel (zinc-plated), seals: FKM
Swing type check valve - wafer type, steel / PTFE
Swing type check valves -wafer type -Steel / PTFE, T= -10°C up to max. 200°C, to be mounted between flanges acc. to DIN PN 10/16, body: carbon steel (zinc-plated), disc: carbon steel (zinc-plated), seals: PTFE
2-way ball valve - steel, butt weld
2-way ball valves -steel -butt weld, full bore, 2- piece design, anti-static device, T= -10 up to 180°C, butt weld ANSI B16.25, body: steel-A105, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE, handle: steel-zinc plated
3-way wafer-type ball valve - steel/40, T-bored
3-way ball valve -wafer type -steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, handlever: steel-galv., Please note the flow direction !
3-way wafer-type ball valve - steel/40, L-bored
3-way ball valve -wafer type -steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, handlever: steel-galv.,
Strainer, Y-pattern, Cast steel
Strainer, Y-pattern, Cast steel -with flanges, face to face acc. to EN 558-1 row 1, mesh width: 1 mm body: GS-C25N, screen: stainless steel-1.4301, gasket: pure graphite
Strainer, Y-pattern, Cast steel with fine screen
Strainer, Y-pattern, Cast steel -with flanges, fine screen, face to face acc. to EN 558-1 row 1, mesh width: 0, 25 mm body: GS-C25N, screen: stainless steel-1.4301, gasket: pure graphite
3-way wafer-type ball valve - steel, L-bored
3-way ball valve -wafer type -steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKMPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
3-way wafer-type ball valve - steel, T-bored
3-way ball valve -wafer type -steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKMPlease note the flow direction !Pneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
Flat body gate valve - Cast steel, trim: stainless steel, DN 40 up to DN 700, PN 16/10, face to face acc. to EN 558-1 row 14 - non rising stem
Flat body gate valve -Cast Steel -non rising stem, metallic seats, face to face acc. to EN 558-1 row 14, temperature: up to max. 120°C, body/bonnet: GS-C25-1.0619, stem: stainless steel-1.4021, seats: stainless steel-1.4301, wedge: GS-C25-1.0619, handwheel: GG-25
3-way wafer-type ball valve - steel, L-bored
3-way ball valve -wafer type -steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKMPneumatic actuator - single actingType 1BRE015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)