Industrial valves - Butterfly valves - Angle - DN 100
Butterfly valve - wafer type, PP-GF/PVC-U/EPDM- electrically operated (24 V)
Butterfly Valve -wafer type -seat: EPDM, soft sealing, centric disc, one piece body, face to face acc. to EN 558-1 row 25, to be mounted between two flanges acc. to DIN EN 1092-1/11/B1 (PN10), working temperature: 0 up to 60°C, body: PP-GF, disc: PVC-U, seat: EPDMElectric actuator 1AL085 - 24 V AC/DCwith 90° rotation, torque: 85 Nm/90 Nm, 12-24 V AC/DC, operating time: 30 s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 35 A - 4, 64 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
Strainer, Y-pattern, GGG-40.3 with fine screen
Strainer, Y-pattern, GGG-40.3 -with flanges, fine screen, face to face acc. to EN 558-1 row 1, mesh width: 0, 25 mm body: GGG-40.3, screen: stainless steel-1.4301, gasket: pure graphite
Swing check valve - GG 25 seat metal to metal, with counterweight
Swing type check valve -GG-25 -seat metal to metal, with counterweight, T= -10°C up to max. 80°C, face to face acc. to EN 558-1 row 48, body/cover: GG-25, pin: stainless steel-X20Cr13, seat: stainless steel-AISI304, swing: GG-25, weight: GG-25
Strainer, Y-pattern, GGG-40.3
Strainer, Y-pattern, GGG-40.3 -with flanges, face to face acc. to EN 558-1 row 1, mesh width: 1, 6 mm body: GGG-40.3, screen: stainless steel-1.4301, gasket: pure graphite
2-way Flange ball valve - stainless steel ISO-mounting pad
2-way ball valve -flange type -stainless steel, split body, full bore, T= -20 up to 180°C, face to face acc. to EN 558-1 row 27, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: RTFE, stem seals: PTFE+Viton, handlever: stainless steel (lockable)
2-way Flange ball valve - GG-25 pneumatically operated (double acting)
2-way ball valve -flange type -GG-25, 2-piece body, full bore, T= -10 up to 90°C, face to face acc. to EN 558-1 row 14, body: GG-25, ball: brass-chrome plated, seats: PTFE-graphite, stem seals: NBRPneumatic actuator - double actingtype 1BRD150, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
Strainer, Y-pattern, GGG-40.3 with fine screen
Strainer, Y-pattern, GGG-40.3 -with flanges, fine screen, face to face acc. to EN 558-1 row 1, mesh width: 0, 25 mm body: GGG-40.3, screen: stainless steel-1.4301, gasket: pure graphite
Flat body gate valve - Cast steel, trim: stainless steel, DN 40 up to DN 700, PN 16/10, face to face acc. to EN 558-1 row 14 - non rising stem
Flat body gate valve -Cast Steel -non rising stem, metallic seats, face to face acc. to EN 558-1 row 14, temperature: up to max. 120°C, body/bonnet: GS-C25-1.0619, stem: stainless steel-1.4021, seats: stainless steel-1.4301, wedge: GS-C25-1.0619, handwheel: GG-25
Swing type check valve, flange type - body: Bronze/ disc: Alumium-bronze / seat: NBR, DN 15 up to DN 300, PN 16/10, full bore - short type
Swing type check valve, flange type -Bronze / NBR, full bore -short type, T= -10°C up to max. 70°C, body: Bronze-CC480K, disc: AlBz-CC333G, body seal: NBRon request: body made of Rg5; seat: EPDM, PTFE, Viton
2-way wafer-type ball valve - steel with integral sealing
2-way ball valves -wafer type -steel -with integral sealing, full bore, T= -20 up to 180°C, flanges with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, handlever: steel-galv., approvals: DVGW- approval for gases up to PN 16 acc. to G260, TA- Luft, Fire-Safe
Stop valve GGG-40.3, with bellow seal - straightway form
Stop valve GGG-40.3 -with bellow seal -PN 25, straightway form, maintenance-free, metallic seat, Tmax=350°C (17, 5 bar), face to face acc. to EN 558-1 row 1, double wall bellow seal, with throttling plug, Lubricating nipple as locking device, secondary sealing: gland packing, position indicator, body: GGG-40.3, bonnet: GGG-40.3, stem: stainless steel-1.4021, plug/seat: stainless steel-1.4021, bellow: stainless steel-1.4571, with handwheel
2-way wafer-type ball valve - stainless steel DVGW/TA Luft/Fire safe
2-way ball valve -wafer type -stainless steel, full bore, T= -20 up to 180°C, flanges with threaded holes (metric) , body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seals: PTFE+FKM, handlever: stainless steel, approvals: DVGW- approval for gases up to PN 16 acc. to G260 and G262, TA- Luft, Fire-Safe
2-way wafer-type ball valve - steel pneumatically operated (double acting)
2-way ball valve -wafer type -cast steel, full bore, T= -20 up to 180°C, flanges with threaded holes (metric) , body: 1.0570, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, approvals: DVGW- approval for gases up to PN 16 acc. to G260, TA- Luft, Fire-SafePneumatic actuator - double actingtype 1BRD220, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2-way ball valve - stainless steel, butt weld, ISO-mounting pad
2-way ball valve -stainless steel -butt weld, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 S13, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE, handlever: stainless steel (lockable)
2-way wafer-type ball valve - stainless steel with contained ball
2-way ball valve -wafer type -stainless steel -with contained ball full bore, T= -20 up to 180°C, flanges with threaded holes (metric) , antistatic device, body: stainless steel-1.4401/1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seals: PTFE+FKM, handlever: stainless steel, approvals: DVGW- approval for gases up to PN 16 acc. to G260 and G262, TA- Luft, Fire-Safe
High performance butterfly valve - wafer type, stainless steel/1.4404/RTFE
High performance butterfly valve -wafer type -stainless/PTFE, double eccentric construction, face to face acc. to EN 558-1 row 20, to be mounted between two flanges acc. to DIN EN 1092-1/11/B1 (PN10/PN16/PN25/PN40), max. working pressure: 40 bar, working temperature: -50 up to 200°C, body: stainless steel-1.4408, disc: stainless steel-1.4404, stem: Duplex-1.4462, seat: RTFE, stem sealing: Graphite, with handlever (gearbox on request)
2-way Flange ball valve - GG-25 electrically operated (24 V)
2-way ball valve -wafer type -GG-25, full bore, T= -10 up to 100°C, flanges with threaded holes (metric) , body: GG-25, ball: brass-chrome plated, seats: RTFE, stem seals: NBRElectric actuator 1AH140 - 230 V AC/DCwith 90° rotation, torque: 140 Nm/ 170 Nm, 85-240 V AC/DC, operating time: 31 s, IP 65, -20°C up to 70°C, duty: 75%, min/max. current: 0, 15 A - 0, 7 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way Flange ball valve - GG-25 electrically operated (24 V)
2-way ball valve -wafer type -GG-25, full bore, T= -10 up to 100°C, flanges with threaded holes (metric) , body: GG-25, ball: brass-chrome plated, seats: RTFE, stem seals: NBRElectric actuator 1AL140 - 24 V AC/DCwith 90° rotation, torque: 140 Nm/ 170 Nm, 12-24 V AC/DC, operating time: 31 s, IP 65, -20°C up to 70°C, duty: 75%, min/max. current: 0, 6 A - 6, 4 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way Flange ball valve - steel pneumatically operated (double acting)
2-way ball valve -flange type -steel, split body, full bore, T= -20 up to 180°C, face to face acc. to EN 558-1 row 27, body: A105 or 1.0570, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, approvals: DVGW- approval for gases up to PN 16 acc. to G260, TA- Luft, Fire-SafePneumatic actuator - double actingtype 1BRD220, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2-way Flange ball valve - GG-25 electrically operated (230 V)
2-way ball valve -flange type -GGG-40, 2-piece body, full bore, T= -10 up to 100°C, face to face acc. to EN 558-1 row 14, body: GGG-40, ball: brass-chrome plated, seats: RTFE, stem seals: NBRElectric actuator 1AH140 - 230 V AC/DCwith 90° rotation, torque: 140 Nm/ 170 Nm, 85-240 V AC/DC, operating time: 31 s, IP 65, -20°C up to 70°C, duty: 75%, min/max. current: 0, 15 A - 0, 7 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override