Industrial valves - Manually - 3/4"
2-way ball valve - stainless steel, female/female
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
Needle valve - stainless steel, female/female
Needle valve -stainless steel -female/female, straightway form, Tmax=250°C ( Please note: T > 50°C - pressure reduction), seat diameter: 9 mm, body: stainless steel-1.4571, stem: stainless steel-1.4571, stem sealing: PTFE, handwheel: plastic
2-way ball valve - stainless steel, female/female
2-way ball valve -stainless steel -female/female, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 M3, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2-way stop valve - stainless steel", female/female
2-way Stop valve stainless steel -female/female -pneumatic actuator (single acting), mounting in any position, T= -10°C up to 180°C, ambient temperature: -10 up to 60°C, pressure range: 0-16 bar, threaded end connections acc. to ISO 228/1, body: stainless steel-1.4408, seat: PTFE, stem packing: PTFEPneumatic actuator - single acting (closing with flow direction)piston diameter= 50 mm, control pressure: 6-8 bar, actuator: stainless steelmedia: clean air (ISO 8573-1:2001)
2-way ball valve - stainless steel, female/female - with DVGW approval for drinking water (PN10)
2-way ball valve -stainless steel -with DVGW approval for drinking water (PN10), acc. to EN13828, full bore, 2-piece design, T= 0 up to 65°C, face to face acc. to DIN 3202-M3, threaded end connections acc. to ISO 7/1, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2-way ball valve - stainless steel, female/female
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonPneumatic actuator - single actingTyp 1BRE030, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
2-way stop valve - stainless steel", female/female
2-way Stop valve stainless steel -female/female -pneumatic actuator (single acting), mounting in any position, T= -10°C up to 180°C, ambient temperature: -10 up to 60°C, pressure range: 0-12 bar, threaded end connections acc. to ISO 228/1, body: stainless steel-1.4408, seat: PTFE, stem packing: PTFEPneumatic actuator - single acting (closing with and against flow direction)piston diameter= 50 mm, control pressure: 6-8 bar, actuator: stainless steelmedia: clean air (ISO 8573-1:2001)
2-way ball valve - stainless steel, female/female
2-way ball valve -stainless steel -female/female, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 M3, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - single actingType 1BRE030, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
2-way ball valve - stainless steel, female/female - with DVGW approval for drinking water (PN10)
2-way ball valve -stainless steel -with DVGW approval for drinking water (PN10), acc. to EN13828, full bore, 2-piece design, T= 0 up to 65°C, face to face acc. to DIN 3202-M3, threaded end connections acc. to ISO 7/1, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonPneumatic actuator - single actingType 1BRE015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
2-way ball valve - stainless steel, female/female
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 150°C, threaded end connections acc. to ISO 7/1, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+Vitonapprovals: DVGW- approval for gases acc. to G260 and G262 up to 5 bar (MOP 5), TA LuftPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2-way ball valve - stainless steel, female/female - electrically operated (24 V)
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonElectric actuator 1AL020 - 24 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 12-24 V AC/DC, operating time: 17s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 18 A - 2, 14 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way ball valve - stainless steel, female/female - electrically operated (230 V)
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonElectric actuator 1AH020 - 230 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 85-240 V AC/DC, operating time: 11s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 01 A - 0, 21 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
G 3/4", Preßluft - 0,2 bis 30 bar
,
2-way ball valve - stainless steel, female/female
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 150°C, threaded end connections acc. to ISO 7/1, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+Vitonapprovals: DVGW- approval for gases acc. to G260 and G262 up to 5 bar (MOP 5), TA LuftPneumatic actuator - single actingType 1BRE015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
2/2-way Solenoid valve - stainless steel, indirectly solenoid actuated, G 1/4" up to G 2", PN16, female/female, operating pressure: 0,1...16/10 bar, 230 V AC (normally closed) - for slightly aggressive gases and liquid fluids
2/2-way Solenoid valve -stainless steel, 230 V AC (normally closed), indirectly solenoid actuated, for slightly aggressive gases and liquid fluids, DN 20, kv= 6, 1 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0, 1 up to 16 bar, IP 65, determined flow direction, damped operation, body: stainless steel-1.4408, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override
2/2-way Solenoid valve - stainless steel, indirectly solenoid actuated, G 1/4" up to G 2", PN16, female/female, operating pressure: 0,1...16/10 bar, 24 V DC (normally closed) - for slightly aggressive gases and liquid fluids
2/2-way Solenoid valve -stainless steel, 24 V DC (normally closed), indirectly solenoid actuated, for slightly aggressive gases and liquid fluids, DN 20, kv= 6, 1 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0, 1 up to 16 bar, IP 65, determined flow direction, damped operation, body: stainless steel-1.4408, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override
2-way ball valve - stainless steel, female/female - electrically operated (230 V)
2-way ball valve -stainless steel -female/female, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 M3, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonElectric actuator 1AH020 - 230 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 85-240 V AC/DC, operating time: 11s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 01 A - 0, 21 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way ball valve - stainless steel, female/female - electrically operated (24 V)
2-way ball valve -stainless steel -female/female, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 M3, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonElectric actuator 1AL020 - 24 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 12-24 V AC/DC, operating time: 17s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 18 A - 2, 14 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 150°C, threaded end connections acc. to ISO 7/1, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+Vitonapprovals: DVGW- approval for gases acc. to G260 and G262 up to 5 bar (MOP 5), TA LuftElectric actuator 1AH020 - 230 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 85-240 V AC/DC, operating time: 11s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 01 A - 0, 21 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 150°C, threaded end connections acc. to ISO 7/1, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+Vitonapprovals: DVGW- approval for gases acc. to G260 and G262 up to 5 bar (MOP 5), TA LuftElectric actuator 1AL020 - 24 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 12-24 V AC/DC, operating time: 17s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 18 A - 2, 14 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override