Industrial valves - Angle - Plastics - DN 25
2-way ball valve - stainless steel, butt weld
2-way ball valves -stainless steel -butt weld, full bore, 2- piece design, anti-static device, T= -20 up to 180°C, butt weld ANSI B16.25, body: stainless steel-1.4404, ball: stainless steel-1.4404, seats: PTFE, stem seal: PTFE, handle: steel-zinc plated
2-way Flange ball valve - Bronze, ball made of stainless steel, DN 15 up to DN 250, PN 16
2-way ball valve -flange type -Bronze, 2-piece body, full bore, T= -10 up to 150°C, face to face acc. to EN 558-1 row 14, body: Bronze-Rg5 (EN 1982), ball: stainless steel-AISI316, stem: stainless steel-AISI316, seats: PTFE-Graphite, stem seals: FKM, handlever: steel
3-way wafer-type ball valve - stainless steel/40, L-bored
3-way ball valve -wafer type -stainless steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: stainless steel-1.4401/1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seals: PTFE+FKM, handlever: stainless steel
3-way wafer-type ball valve - stainless steel/40, T-bored
3-way ball valve -wafer type -stainless steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: stainless steel-1.4401/1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seals: PTFE+FKM, handlever: stainless steel, Please note the flow direction !
Pressure reducing valve, with flanges, Pressure reducing valve for water, non-viscous fluids and neutral and non-combustible gases, pressure-relieved single seated valve, with inside dirt-trap strainer, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: brass, diaphragm: NBR, seals: NBR, inlet pressure: max. 16 bar, outlet pressure: adjustable 1, 5 up to 6 bar, minimum diff. pressure: 1 bar, Tmax= 75°C, kvs= 5, 4 m3/h
Pressure reducing valve, with flanges, for compressed air and neutral gases, Pressure reducing valve for compressed air and neutral, non-combustible gases, non-pressure-relieved single seated valve, flanges acc. to DIN 2501 PN 40, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: brass, regulating piston: brass, seals: NBR, inlet pressure: max. 40 bar, outlet pressure: adjustable 1, 5 up to 20 bar, highest reduction ratio: 6:1, Tmax= 75°C, kvs=1, 6 m3/h