Industrial valves - Pressure reducing valves - 3-way - Approval - Without approval
Drain cock - stainless steel", PN 6, male thread x bent outlet
Drain cock -stainless steel, male thread x bent outlet, max. 6 bar, T= -10° up to 50°C, bore: 2, 5 mm body: stainless steel-1.4571, handle: Polypropylene
Manometer gauge valve acc. to DIN 16271 - stainless steel", male thread x sleeve
Manometer gauge valve acc. to DIN 16271 -stainless steel, male thread x sleeve, PN 400, T= up to 200°C, body: stainless steel-1.4571, stem: stainless steel-1.4571, stem sealing: Teflon, handwheel: Bakelitewith test connector M20x1, 5
Pressure reducing valve, female/female, for neutral gases, Pressure reducing valve for neutral and non-combustible gases, non-pressure-relieved single seated valve, threaded ends acc. to ISO 228, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: brass, diaphragm: NBR, seals: NBR, inlet pressure: max. 25 bar, outlet pressure: adjustable 1, 5 up to 8 bar, highest reduction ratio: 10:1, Tmax= 75°C, kvs=0, 5 m3/h
2/2-way Solenoid valve - brass, with force lifting, G 1/4" up to G 1/2", female/female, operating pressure: 0...10 bar, 230 V AC (normally closed) - for neutral gases and liquids
2/2-way Solenoid valve -brass, with force lifting, 230 V AC (normally closed), for neutral gases and liquids, without differential pressure, DN 10, kv= 1, 5 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: seat seal made of FPM or EPDM
2/2-way Solenoid valve - brass, with force lifting, G 1/4" up to G 1/2", female/female, operating pressure: 0...10 bar, 24 V DC (normally closed) - for neutral gases and liquids
2/2-way Solenoid valve -brass, with force lifting, 24 V DC (normally closed), for neutral gases and liquids, without differential pressure, DN 10, kv= 1, 5 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: seat seal made of FPM or EPDM
2/2-way Solenoid valve - brass, indirectly solenoid actuated, G 1/4" up to G 2", PN16, female/female, operating pressure: 0,1...16/10 bar, 230 V AC (normally closed) - for neutral gases and liquids
2/2-way Solenoid valve -brass, 230 V AC (normally closed), indirectly solenoid actuated, for neutral gases and liquids, DN 8, kv= 1, 9 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0, 1 up to 16 bar, IP 65, determined flow direction, damped operation, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override
2/2-way Solenoid valve - brass, indirectly solenoid actuated, G 1/4" up to G 2", PN16, female/female, operating pressure: 0,1...16/10 bar, 24 V DC (normally closed) - for neutral gases and liquids
2/2-way Solenoid valve -brass, 24 V DC (normally closed), indirectly solenoid actuated, for neutral gases and liquids, DN 8, kv= 1, 9 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0, 1 up to 16 bar, IP 65, determined flow direction, damped operation, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override
Pressure reducing valve, female/female, for water and non-viscous fluids, Pressure reducing valve for water, non-viscous fluids and neutral and non-combustible gases, pressure-relieved single seated valve, threaded ends acc. to ISO 228, with inside dirt-trap strainer, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: brass, diaphragm: NBR, seals: NBR, inlet pressure: max. 25 bar, outlet pressure: adjustable 1, 5 up to 10 bar, minimum diff. pressure: 1 bar, Tmax= 75°C, kvs=2, 9 m3/h
Manometer gauge valve acc. to DIN 16271 - stainless steel", male thread x sleeve
Manometer gauge valve acc. to DIN 16271 -stainless steel, male thread x sleeve, PN 400, T= up to 200°C, body: stainless steel-1.4571, stem: stainless steel-1.4571, stem sealing: Teflon, handwheel: Bakelitewith test flange 60 x 25 mm
Check valve GG-25, female/female
Check valve -GG-25 -female/female, soft seat, T= -10°C up to max. 80°C, installtion in any position, threaded end connections acc. to ISO 228/1, body: GG-25 (internal and external epoxy coating), disc: GG-25, inner parts: brass, spring: AISI302, seat: NBRon request: FKM seat, with drain connections
G 1/2", Preßluft - 0,2 bis 30 bar
,
2-way ball valve - brass G 1/4" up to G 3", PN 40/25, female/female
2-way ball valve -brass -female/female -ISO mounting pad, full bore, T= 0 up to 110°C (for fluids), T= -20 up to 60°C (for gas), threaded end connections acc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE, stem seals: FKMPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2/2-way Solenoid valve - brass, with force lifting, G 1/4" up to G 2", female/female, operating pressure: 0...10 bar, 230 V AC (normally closed) - for neutral gases and liquids
2/2-way Solenoid valve -brass, with force lifting, 230 V AC (normally closed), for neutral gases and liquids, without differential pressure, DN 8, kv= 1, 9 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, damped operation, suitable for vacuum, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override
2/2-way Solenoid valve - brass, with force lifting, G 1/4" up to G 2", female/female, operating pressure: 0...10 bar, 24 V DC (normally closed) - for neutral gases and liquids
2/2-way Solenoid valve -brass, with force lifting, 24 V DC (normally closed), for neutral gases and liquids, without differential pressure, DN 8, kv= 1, 9 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, damped operation, suitable for vacuum, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override
2-way ball valve - brass G 1/4" up to G 3'', PN 40/25, female/female
2-way ball valve -brass -female/female, full bore, T= 0 up to 110°C (for fluids), T= -20 up to 60°C (for gas), threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE, stem seals: FKM, with ISO 5211 mounting pad Pneumatic actuator - single actingcontrol pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
2-way ball valve - stainless steel, female/female
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
3-way ball valve - brass, T-bore, pneumatically operated (double acting)
3-way ball valve -brass with L-bore, L-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
3-way ball valve - brass, L-bore, G 1/4" up to G 2", PN 30/16
3-way ball valve -brass with L-bore, L-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2-way stop valve - stainless steel", female/female
2-way Stop valve stainless steel -female/female -pneumatic actuator (single acting), mounting in any position, T= -10°C up to 180°C, ambient temperature: -10 up to 60°C, pressure range: 0-16 bar, threaded end connections acc. to ISO 228/1, body: stainless steel-1.4408, seat: PTFE, stem packing: PTFEPneumatic actuator - single acting (closing with flow direction)piston diameter= 40 mm, control pressure: 6-8 bar, actuator: stainless steelmedia: clean air (ISO 8573-1:2001)
2-way ball valve - stainless steel, female/female
2-way ball valve -stainless steel -female/female, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 M3, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)