Industrial valves - 1/2" - DVGW drinkingwater

Drain cock -stainless steel, male thread x straight outlet, max. 6 bar, T= -10° up to 50°C, bore: 5 mm body: stainless steel-1.4571, handle: Polypropylene

Drain cock -stainless steel, male thread x hose nipple, max. 6 bar, T= -10° up to 50°C, bore: 5 mm ; hose nipple: 13, 5 mmbody: stainless steel-1.4571, handle: Polypropylene

Needle valve -stainless steel -female/female, straightway form, Tmax=250°C ( Please note: T > 50°C - pressure reduction), seat diameter: 7 mm, body: stainless steel-1.4571, stem: stainless steel-1.4571, stem sealing: PTFE, handwheel: plastic

Drain cock -stainless steel, male thread x bent outlet, max. 6 bar, T= -10° up to 50°C, bore: 5 mm body: stainless steel-1.4571, handle: Polypropylene

Manometer gauge valve acc. to DIN 16271 -stainless steel, male thread x sleeve, PN 400, T= up to 200°C, body: stainless steel-1.4571, stem: stainless steel-1.4571, stem sealing: Teflon, handwheel: Bakelitewith test connector M20x1, 5

Manometer gauge valve acc. to DIN 16271 -stainless steel, male thread x sleeve, PN 400, T= up to 200°C, body: stainless steel-1.4571, stem: stainless steel-1.4571, stem sealing: Teflon, handwheel: Bakelitewith test flange 60 x 25 mm

Pressure reducing valve, stainless steel, for aggressive water and fluids, Pressure reducing valve for aggressive water, aggressive fluids, compressed air and gases, pressure-relieved single seated valve, threaded ends acc. to ISO 228, with inside dirt-trap strainer, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: stainless steel-1.4408, bonnet: stainless steel-1.4408, diaphragm: FKM, seals: FKM, inlet pressure: max. 25 bar, outlet pressure: adjustable 1 up to 6 bar, minimum diff. pressure: 1 bar, Tmax= 75°C, kvs=2, 9 m3/h

Pressure reducing valve, stainless steel, for aggressive water and fluids, Pressure reducing valve for aggressive water, aggressive fluids, compressed air and gases, pressure-relieved single seated valve, flanges acc. to DIN EN 1092 PN 40, with inside dirt-trap strainer, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: stainless steel-1.4408, bonnet: stainless steel-1.4408, diaphragm: FKM, seals: FKM, inlet pressure: max. 25 bar, outlet pressure: adjustable 1 up to 6 bar, minimum diff. pressure: 1 bar, Tmax= 75°C, kvs=2, 9 m3/h