Industrial valves - Regulating ball valves - Angle - Brass - Electrically
Electric actuator 1BL010 -24 V DC, with 90° rotation, torque: 10 Nm, 24 V DC, operating time: 4 s, IP 65, ambient temp.: -5°C up to 55°C, duty: 50%, approx. 0, 67 m cable ( 6 x 0, 75 mm2), plastic housing (PA), optical position indicator, one limit switch for signal, manual overrideoption: add. one limit switch
Position indicator OPEN/CLOSE, double sensor Pepperl+Fuchs, 10...30 V DC, 5 m cable
Position indicator OPEN/CLOSE, double sensor Pepperl+Fuchs -10...30 V DC, inductive sensor Pepperl+Fuchs type NBN3-F25-E8, inductive, 10...30 V DC, 3-wire, PNP Dual NO, IP 67, T= -25 up to 70 °C, output status indication (LED-yellow), housing material: PBT, 5 m cable
3-way wafer-type ball valve - steel/40, T-bored
3-way ball valve -wafer type -steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, handlever: steel-galv., Please note the flow direction !
Swing type check valve - wafer type, PVC-U / EPDM
Swing type check valves -wafer type -PVC-U / PTFE, T= 0°C up to max. 50°C, to be mounted between flanges acc. to DIN PN 6/10, body: PVC-U, disc: PVC-U, seat: PTFEPlease note the max. working pressure in relation to the temperature !on request: body made of PVC-C or PP or PVDF, with spring
Flat body gate valve - GGG-40.3, trim: Bronze/SoMs59, DN 40 up to DN 700, PN 16/10, face to face acc. to EN 558-1 row 14 - non rising stem
Flat body gate valve -Ductile iron -non rising stem, metallic seats, face to face acc. to EN 558-1 row 14, temperature: up to max. 120°C, body/bonnet: GGG-40.3- EN JS1025, stem: SoMs59-CW710R, seats: Rg5-CC491K, wedge: Rg5-CC491K (up to DN 100), GGG-40.3 (DN 125 and higher), handwheel: GG-25
2-way ball valve - stainless steel, butt weld
2-way ball valves -stainless steel -butt weld, full bore, 2- piece design, anti-static device, T= -20 up to 180°C, butt weld ANSI B16.25, body: stainless steel-1.4404, ball: stainless steel-1.4404, seats: PTFE, stem seal: PTFE, handle: steel-zinc plated
3-way wafer-type ball valve - steel/40, L-bored
3-way ball valve -wafer type -steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, handlever: steel-galv.,
2-way ball valve - brass G 1/4" up to G 3'', PN 40/25, female/female
2-way ball valve -brass -female/female, full bore, T= 0 up to 110°C (for fluids), T= -20 up to 60°C (for gas), threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE, stem seals: FKM, with ISO 5211 mounting pad Pneumatic actuator - single actingcontrol pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
Foot valve - GG 25 soft seat
Foot valve -GG-25 -soft seat, flange connection, T= -10°C up to max. 80°C, body: GG-25, disc: GG-25, slide bar: drawn brass, seat: rubber, sieve: carbon steel-zinc pl. (holes: 8 mm)
2-way ball valve - stainless steel, female/female
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
3-way ball valve - brass, T-bore, pneumatically operated (double acting)
3-way ball valve -brass with L-bore, L-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
3-way ball valve - brass, L-bore, G 1/4" up to G 2", PN 30/16
3-way ball valve -brass with L-bore, L-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
Swing check valve - GG 25 seat metal to metal
Swing type check valve -GG-25 -seat metal to metal, T= -10°C up to max. 80°C, face to face acc. to EN 558-1 row 48, body/cover: GG-25, pin: stainless steel-X20Cr13, seat: stainless steel-AISI304, swing: GG-25
2-way stop valve - stainless steel", female/female
2-way Stop valve stainless steel -female/female -pneumatic actuator (single acting), mounting in any position, T= -10°C up to 180°C, ambient temperature: -10 up to 60°C, pressure range: 0-16 bar, threaded end connections acc. to ISO 228/1, body: stainless steel-1.4408, seat: PTFE, stem packing: PTFEPneumatic actuator - single acting (closing with flow direction)piston diameter= 40 mm, control pressure: 6-8 bar, actuator: stainless steelmedia: clean air (ISO 8573-1:2001)
2-way stop valve - stainless steel, butt welding ends
2-way Stop valve stainless steel -butt welding ends -pneumatic actuator, mounting in any position, T= -10°C up to 180°C, ambient temperature: -10 up to 60°C, pressure range: 0-16 bar, butt welding ends acc. to DIN 11850.2, body: stainless steel-1.4408, seat: PTFE, stem packing: PTFEPneumatic actuator - single acting (closing with flow direction)piston diameter= 40 mm, control pressure: 6-8 bar, actuator: stainless steelmedia: clean air (ISO 8573-1:2001)
Check valve - flange type, GG-25/NBR/stainless steel
Check valve -flange type -GG-25, soft seat, T= -10°C up to max. 80°C, installtion in any position, body: GG-25 (internal and external epoxy coating), disc: stainless steel-CF8M, inner parts: stainless steel-CF8M, spring: AISI302, seat: NBRon request: FKM seat, with drain connections
2-way ball valve - stainless steel, butt weld
2-way ball valve -stainless steel -butt weld, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 S13, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFEPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2-way ball valve - stainless steel, female/female
2-way ball valve -stainless steel -female/female, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 M3, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
Swing type check valve, flange type - body: GG-25 / seat: NBR, DN 15 up to DN 300, PN 16/10, full bore - short type
Swing type check valve, flange type -GG-25 / NBR, full bore -short type, T= -10°C up to max. 70°C, body: GG-25 / EN-JL1040, disc: steel, seat: NBR, body seal: NBRon request:body made of GGG-40; seat: EPDM, PTFE, Viton; disc made of stainless steel
Flat body gate valve - GGG-40.3, trim: Bronze/SoMs59, DN 40 up to DN 700, PN 16/10, face to face acc. to EN 558-1 row 14, non rising stem - with indicator
Flat body gate valve -Ductile iron -with indicator, non rising stem, metallic seats, face to face acc. to EN 558-1 row 14, temperature: up to max. 120°C, body/bonnet: GGG-40.3- EN JS1025, stem: SoMs59-CW710R, seats: Rg5-CC491K, indicator: Rg5-CC491K, wedge: Rg5-CC491K (up to DN 100), GGG-40.3 (DN 125 and higher), handwheel: GG-25