Industrial valves - Stainless steel

Product filter

Article found: 116

3-way ball valve - stainless steel, T-bored

3-way ball valve -stainless steel with T-bore, reduce bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, threaded connectionacc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)

2-way stop valve - stainless steel", female/female

2-way Stop valve stainless steel -female/female -pneumatic actuator (single acting), mounting in any position, T= -10°C up to 180°C, ambient temperature: -10 up to 60°C, pressure range: 0-16 bar, threaded end connections acc. to ISO 228/1, body: stainless steel-1.4408, seat: PTFE, stem packing: PTFEPneumatic actuator - single acting (closing with and against flow direction)piston diameter= 50 mm, control pressure: 6-8 bar, actuator: stainless steelmedia: clean air (ISO 8573-1:2001)

2-way stop valve - stainless steel, butt welding ends

2-way Stop valve stainless steel -butt welding ends -pneumatic actuator, mounting in any position, T= -10°C up to 180°C, ambient temperature: -10 up to 60°C, pressure range: 0-16 bar, butt welding ends acc. to DIN 11850.2, body: stainless steel-1.4408, seat: PTFE, stem packing: PTFEPneumatic actuator - single acting (closing with and against flow direction)piston diameter= 50 mm, control pressure: 6-8 bar, actuator: stainless steelmedia: clean air (ISO 8573-1:2001)

2-way ball valve - stainless steel, butt weld

2-way ball valve -stainless steel -butt weld, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 S13, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFEPneumatic actuator - single actingType 1BRE030, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)

2-way ball valve - stainless steel, female/female

2-way ball valve -stainless steel -female/female, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 M3, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - single actingType 1BRE030, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)

Dual plate check valve - wafer type, Stainless steel / seat metal to metal

Dual plate check valves -wafer type -Stainless steel / seat metal to metal, T= -10°C up to max. 200°C, to be mounted between flanges acc. to DIN PN 10/16, face to face acc. to EN558-1 row 16, body: stainless steel-1.4408, plates: stainless steel-1.4408, seals: metal to metal

3-way ball valve - stainless steel, L-bored

3-way ball valve -stainless steel with L-bore, reduce bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, threaded connectionacc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - single actingType 1BRE030, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)

G 1/2", Preßluft - 0,2 bis 30 bar

,

2-way wafer-type ball valve - stainless steel pneumatically operated (single acting)

2-way ball valve -wafer type -stainless steel, full bore, T= -20 up to 180°C, flanges with threaded holes (metric), mounting flange acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonPneumatic actuator - single actingType 1BRE030, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)

3-way ball valve - stainless steel, T-bored

3-way ball valve -stainless steel with T-bore, reduce bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, threaded connectionacc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - single actingType 1BRE030, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)

2-way ball valve - stainless steel, female/female - electrically operated (230 V)

2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonElectric actuator 1AH020 - 230 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 85-240 V AC/DC, operating time: 11s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 01 A - 0, 21 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override

2-way ball valve - stainless steel, female/female - electrically operated (24 V)

2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonElectric actuator 1AL020 - 24 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 12-24 V AC/DC, operating time: 17s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 18 A - 2, 14 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override

2/2-way Solenoid valve - stainless steel, with force lifting, G 1/4" up to G 2", female/female, operating pressure: 0...10 bar, 230 V AC (normally closed) - for slightly aggressive gases and liquid fluids

2/2-way Solenoid valve -stainless steel, with force lifting, 230 V AC (normally closed), for slightly aggressive gases and liquid fluids, without differential pressure, DN 8, kv= 1, 9 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, damped operation, suitable for vacuum, body: stainless steel-1.4408, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override

2/2-way Solenoid valve - stainless steel, with force lifting, G 1/4" up to G 2", female/female, operating pressure: 0...10 bar, 24 V DC (normally closed) - for slightly aggressive gases and liquid fluids

2/2-way Solenoid valve -stainless steel, with force lifting, 24 V DC (normally closed), for slightly aggressive gases and liquid fluids, without differential pressure, DN 8, kv= 1, 9 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, damped operation, suitable for vacuum, body: stainless steel-1.4408, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override

3-way wafer-type ball valve - stainless steel/40, L-bored

3-way ball valve -wafer type -stainless steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: stainless steel-1.4401/1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seals: PTFE+FKM, handlever: stainless steel

3-way wafer-type ball valve - stainless steel/40, T-bored

3-way ball valve -wafer type -stainless steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: stainless steel-1.4401/1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seals: PTFE+FKM, handlever: stainless steel, Please note the flow direction !

2-Wege Kugelhahn aus Edelstahl, Anschweißenden

2-way ball valve -stainless steel -butt weld, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 S13, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFEElectric actuator 1AH020 - 230 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 85-240 V AC/DC, operating time: 11s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 01 A - 0, 21 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override

2-way ball valve - stainless steel, female/female - electrically operated (230 V)

2-way ball valve -stainless steel -female/female, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 M3, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonElectric actuator 1AH020 - 230 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 85-240 V AC/DC, operating time: 11s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 01 A - 0, 21 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override

3-way ball valve - stainless steel, T-bored - electrically operated (230 V)

3-way ball valve -stainless steel with T-bore, reduce bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, threaded connectionacc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonElectric actuator 1AH020 - 230 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 85-240 V AC/DC, operating time: 11s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 01 A - 0, 21 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override

2-way ball valve - stainless steel, butt weld - electrically operated (230 V)

2-way ball valve -stainless steel -butt weld, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 S13, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE, Electric actuator 1AL020 - 24 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 12-24 V AC/DC, operating time: 17s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 18 A - 2, 14 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override

(1)All prices are in EURO plus the current legally valid value added tax.
*Only for companies, tradesmen, associations, craft businesses, public authorities or self-employed freelancers within the meaning of § 14 BGB.