Industrial valves - Strainer - Brass
Pressure reducing valve, female/female, for compressed air and neutral gases, Pressure reducing valve for neutral and non-combustible gases, non-pressure-relieved single seated valve, threaded ends acc. to ISO 228, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: brass, regulating piston: brass, seals: NBR, inlet pressure: max. 40 bar, outlet pressure: adjustable 1, 5 up to 20 bar, highest reduction ratio: 6:1, Tmax= 75°C, kvs=0, 5 m3/h
2-way ball valve - brass G 1/4" up to G 3", PN 40/25, female/female - electr. operated (24 V), operating time: 17 s, IP 65
2-way ball valve -brass -female/female, full bore, T= 0 up to 110°C (for fluids), T= -20 up to 60°C (for gas), threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE, stem seals: FKMElectric actuator 1AL010 - 24 V AC/DCwith 90° rotation, torque: 10 Nm/12 Nm, 12-48 V DC / 15-48 V AC, operating time: 17s, IP 65, -20°C up to 70°C, duty: 75%, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
3-way ball valve - stainless steel, T-bored
3-way ball valve -stainless steel with T-bore, reduce bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, threaded connectionacc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - single actingType 1BRE030, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
2-way ball valve - stainless steel, female/female - electrically operated (230 V)
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonElectric actuator 1AH020 - 230 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 85-240 V AC/DC, operating time: 11s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 01 A - 0, 21 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way ball valve - stainless steel, female/female - electrically operated (24 V)
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonElectric actuator 1AL020 - 24 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 12-24 V AC/DC, operating time: 17s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 18 A - 2, 14 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
3-way ball valve - brass - male/male, T-bore, electr. operated (230 V)
3-way ball valve -brass -electr. operated (230 V), T-bore, T= +6 up to 100°C, max. differential pressure: 4 bar, threaded end connections acc. to ISO228/1, body: brass-nickel plated, ball: stainless steel, seats: PTFE+Viton, stem: stainless steel, stem seals: EPDM Electric actuator LR230A - 230 V ACwith 90° rotation, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 1, 5 W / power consumption in rest position: 0, 4 W, ambient temperature: 0°C up to 50°C, manual ovveride, optical position indicator, maintenance-free on request: limit switches for signal Open/Close, with potentiometer, IP 66/67, ...
3-way ball valve - brass - male/male, T-bore, electr. operated (24 V)
3-way ball valve -brass -electr. operated (24 V), T-bore, T= +6 up to 100°C, max. differential pressure: 4 bar, threaded end connections acc. to ISO228/1, body: brass-nickel plated, ball: stainless steel, seats: PTFE+Viton, stem: stainless steel, stem seals: EPDM Electric actuator LR24A - 24 V AC/DCwith 90° rotation, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 1 W / power consumption in rest position: 0, 2 W, ambient temperature: 0°C up to 50°C, manual ovveride, optical position indicator, maintenance-free on request: limit switches for signal Open/Close, with potentiometer, IP 66/67, ...
3-way ball valve - brass, T-bore - electrically operated (230 V)
3-way ball valve -brass with T-bore, T-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMElectric actuator 1AH020 - 230 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 85-240 V AC/DC, operating time: 11s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 01 A - 0, 21 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
3-way ball valve - brass, T-bore - electrically operated (24 V)
3-way ball valve -brass with T-bore, T-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMElectric actuator 1AL020 - 24 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 12-24 V AC/DC, operating time: 17s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 18 A - 2, 14 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
3-way ball valve - brass, L-bore - electrically operated (230 V)
3-way ball valve -brass with L-bore, L-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMElectric actuator 1AH020 - 230 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 85-240 V AC/DC, operating time: 11s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 01 A - 0, 21 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
3-way ball valve - brass, L-bore - electrically operated (24 V)
3-way ball valve -brass with L-bore, L-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMElectric actuator 1AL020 - 24 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 12-24 V AC/DC, operating time: 17s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 18 A - 2, 14 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
3-way control ball valve - brass, kvs=0,25 - electr. operated (24 V), modulating
3-way control ball valve -brass, kvs= 0, 25 m3/h, flow characteristic: equal percentage, max. differential pressure: 3, 5 bar, leakage rate: A-AB (air-bubble-tight), T= -10 bis 120°C, threaded end connections acc. to ISO7/1, body: brass-nickel plated, ball: stainless steel, seats: PTFE+Viton, stem: stainless steel, stem seals: EPDM, characterising disc: Tefzel Electric actuator LR24A.SR - 24 V AC/DC, modulatingelectric actuator (90°), 24 V DC, IP 54, position signal: 0...10 V DC, position feedback: 2...10 V DC, running time: 90 s, plastic housing, 1 m cable ( 4 x 0, 75 mm2), power consumption in operation: 1, 5 W, power consumption in rest position: 0, 4 W, ambient temperature: T= -30 bis +50°C, manual override, position indication, maintenance-free
2-way ball valve PVC-U, seats PTFE, female/female - electrically operated (230 V)
2-way ball valve -PVC-U -female/female, full bore, T= 0 up to 60°C, threaded end connections acc. to DIN ISO 228, radial installation or removal, body: PVC-U, ball: PVC-U, seats: PTFE, stem seals: EPDM (on request: FPM)Electric actuator 1AH010 - 230 V AC/DCwith 90° rotation, torque: 10 Nm/12 Nm, 85 - 240 V AC/DC, operating time: 17s, IP 65, -20°C up to 70°C, duty: 75%, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way ball valve PVC-U, seats PTFE, female/female - electrically operated (24 V)
2-way ball valve -PVC-U -female/female, full bore, T= 0 up to 60°C, threaded end connections acc. to DIN ISO 228, radial installation or removal, body: PVC-U, ball: PVC-U, seats: PTFE, stem seals: EPDM (on request: FPM)Electric actuator 1AL010 - 24 V AC/DCwith 90° rotation, torque: 10 Nm/12 Nm, 12-48 V DC / 15-48 V AC, operating time: 17s, IP 65, -20°C up to 70°C, duty: 75%, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2/2-way Solenoid valve - stainless steel, with force lifting, G 1/4" up to G 2", female/female, operating pressure: 0...10 bar, 230 V AC (normally closed) - for slightly aggressive gases and liquid fluids
2/2-way Solenoid valve -stainless steel, with force lifting, 230 V AC (normally closed), for slightly aggressive gases and liquid fluids, without differential pressure, DN 8, kv= 1, 9 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, damped operation, suitable for vacuum, body: stainless steel-1.4408, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override
2/2-way Solenoid valve - stainless steel, with force lifting, G 1/4" up to G 2", female/female, operating pressure: 0...10 bar, 24 V DC (normally closed) - for slightly aggressive gases and liquid fluids
2/2-way Solenoid valve -stainless steel, with force lifting, 24 V DC (normally closed), for slightly aggressive gases and liquid fluids, without differential pressure, DN 8, kv= 1, 9 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, damped operation, suitable for vacuum, body: stainless steel-1.4408, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override
Pressure reducing valve, with unions, Pressure reducing valve for water, non-viscous fluids and neutral and non-combustible gases, pressure-relieved single seated valve, threaded sockets acc. to ISO 7, with inside dirt-trap strainer, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: cast iron, diaphragm: NBR, seals: NBR, inlet pressure: max. 16 bar, outlet pressure: adjustable 1, 5 up to 6 bar, minimum diff. pressure: 1 bar, Tmax= 75°C, kvs=9 m3/h
2-way ball valve - brass, electr. operated (230 V) - spring return
2-way ball valve -brass -female/female -electr. operated (24 V) -spring-return, full bore, T= -10 up to 120°C, max. differential pressure: 10 bar, threaded end connections acc. to ISO7/1, body: brass- nickel plated, ball: stainless steel, stem: stainless steel, seats: PTFE+EPDM, stem seals: EPDM Electric actuator LRF230A - spring return electric actuator (90°), torque: 4 Nm, 24 V DC, IP 54, running time: 75 s, runnning time emergency setting position: < 20 s, plastic housing, 1 m cable ( 2 x 0, 75 mm2), power consumption in operation: 2 W, power consumption in rest position: 0, 5 W, service life: min. 60.000 emergency positions, ambient temperature: T= 0 bis +50°C, manual override, position indication, maintenance-freeDirection of rotation spring-return (selectable): Deenergised NC - valve closed, Deenergised NO - valve open
2-way ball valve - brass, electr. operated (24 V) - spring return
2-way ball valve -brass -female/female -electr. operated (24 V) -spring-return, full bore, T= -10 up to 120°C, max. differential pressure: 10 bar, threaded end connections acc. to ISO7/1, body: brass- nickel plated, ball: stainless steel, stem: stainless steel, seats: PTFE+EPDM, stem seals: EPDM Electric actuator LRF24 - spring return electric actuator (90°), torque: 4 Nm, 24 V DC, IP 54, running time: 75 s, runnning time emergency setting position: < 20 s, plastic housing, 1 m cable ( 2 x 0, 75 mm2), power consumption in operation: 5 W, power consumption in rest position: 2, 5 W, service life: min. 60.000 emergency positions, ambient temperature: T= 0 bis +50°C, manual override, position indication, maintenance-freeDirection of rotation spring-return (selectable): Deenergised NC - valve closed, Deenergised NO - valve open
2-way control ball valve - brass, kvs=0,25 - electr. operated (24 V), modulating - spring return
2-way control ball valve -brass, kvs= 0, 25 m3/h, flow characteristic: equal percentage, max. differential pressure: 3, 5 bar, leakage rate: A (air-bubble-tight), T= -10 bis 120°C, threaded end connections acc. to ISO7/1, body: brass-nickel plated, ball: stainless steel, seats: PTFE+Viton, stem: stainless steel, stem seals: EPDM, characterising disc: Tefzel Electric actuator LRF24.SR - 24 V AC/DC, modulating - spring return (NC)electric actuator (90°), 24 V DC, IP 54, deenergised closed (NC), position signal: 0...10 V DC, position feedback: 2...10 V DC, running time: 150 s, runnning time emergency setting position: < 20 s, plastic housing, 1 m cable ( 4 x 0, 75 mm2), power consumption in operation: 2, 5 W, power consumption in rest position: 1 W, service life: min. 60.000 emergency positions, ambient temperature: T= -30 bis +50°C, manual override, position indication, maintenance-free