Industrial valves - Strainer - Bronze - 2"
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 150°C, threaded end connections acc. to ISO 7/1, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+Vitonapprovals: DVGW- approval for gases acc. to G260 and G262 up to 5 bar (MOP 5), TA LuftElectric actuator 1AH055 - 230 V AC/DCwith 90° rotation, torque: 55 Nm/ 60 Nm, 85-240 V AC/DC, operating time: 14s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 04 A - 0, 31 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 150°C, threaded end connections acc. to ISO 7/1, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+Vitonapprovals: DVGW- approval for gases acc. to G260 and G262 up to 5 bar (MOP 5), TA LuftElectric actuator 1AL055 - 24 V AC/DCwith 90° rotation, torque: 55 Nm/60 Nm, 12-24 V AC/DC, operating time: 16 s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 33 A - 4, 12 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
3-way ball valve - stainless steel, T-bored
3-way ball valve -stainless steel with T-bore, reduce bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, threaded connectionacc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - single actingType 1BRE300, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
3-way ball valve - stainless steel, L-bored
3-way ball valve -stainless steel with L-bore, reduce bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, threaded connectionacc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - single actingType 1BRE300, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
2/2-way Solenoid valve - stainless steel, indirectly solenoid actuated, G 1/4" up to G 2", PN16, female/female, operating pressure: 0,1...16/10 bar, 230 V AC (normally closed) - for slightly aggressive gases and liquid fluids
2/2-way Solenoid valve -stainless steel, 230 V AC (normally closed), indirectly solenoid actuated, for slightly aggressive gases and liquid fluids, DN 50, kv= 41 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0, 1 up to 16 bar, IP 65, determined flow direction, damped operation, body: stainless steel-1.4408, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override
2/2-way Solenoid valve - stainless steel, indirectly solenoid actuated, G 1/4" up to G 2", PN16, female/female, operating pressure: 0,1...16/10 bar, 24 V DC (normally closed) - for slightly aggressive gases and liquid fluids
2/2-way Solenoid valve -stainless steel, 24 V DC (normally closed), indirectly solenoid actuated, for slightly aggressive gases and liquid fluids, DN 50, kv= 41 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0, 1 up to 16 bar, IP 65, determined flow direction, damped operation, body: stainless steel-1.4408, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override
3-way ball valve - stainless steel, L-bored - electrically operated (24 V)
3-way ball valve -stainless steel with L-bore, reduce bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, threaded connectionacc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonElectric actuator 1AL085 - 24 V AC/DCwith 90° rotation, torque: 85 Nm/90 Nm, 12-24 V AC/DC, operating time: 30 s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 35 A - 4, 64 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
Pressure reducing valve, stainless steel, for aggressive water and fluids, Pressure reducing valve for aggressive water, aggressive fluids, compressed air and gases, pressure-relieved single seated valve, threaded ends acc. to ISO 228, with inside dirt-trap strainer, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: stainless steel-1.4408, bonnet: stainless steel-1.4408, diaphragm: FKM, seals: FKM, inlet pressure: max. 25 bar, outlet pressure: adjustable 1 up to 6 bar, minimum diff. pressure: 1 bar, Tmax= 75°C, kvs= 13 m3/h
3-way ball valve - stainless steel, L-bored - electrically operated (230 V)
3-way ball valve -stainless steel with L-bore, reduce bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, threaded connectionacc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonElectric actuator 1AH085 - 230 V AC/DCwith 90° rotation, torque: 85 Nm/ 90 Nm, 85-240 V AC/DC, operating time: 35 s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 04 A - 0, 31 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
3-way ball valve - stainless steel, T-bored - electrically operated (230 V)
3-way ball valve -stainless steel with T-bore, reduce bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, threaded connectionacc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonElectric actuator 1AH085 - 230 V AC/DCwith 90° rotation, torque: 85 Nm/ 90 Nm, 85-240 V AC/DC, operating time: 35 s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 04 A - 0, 31 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
3-way ball valve - stainless steel, T-bored - electrically operated (24 V)
3-way ball valve -stainless steel with T-bore, reduce bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, threaded connectionacc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonElectric actuator 1AL085 - 24 V AC/DCwith 90° rotation, torque: 85 Nm/90 Nm, 12-24 V AC/DC, operating time: 30 s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 35 A - 4, 64 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
Pressure reducing valve, female/female, for compressed air and neutral gases, Pressure reducing valve for neutral and non-combustible gases, non-pressure-relieved single seated valve, threaded ends acc. to ISO 228, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: brass, regulating piston: brass, seals: NBR, inlet pressure: max. 40 bar, outlet pressure: adjustable 1, 5 up to 20 bar, highest reduction ratio: 6:1, Tmax= 75°C, kvs= 7, 2 m3/h
2/2-way Solenoid valve - stainless steel, with force lifting, G 1/4" up to G 2", female/female, operating pressure: 0...10 bar, 230 V AC (normally closed) - for slightly aggressive gases and liquid fluids
2/2-way Solenoid valve -stainless steel, with force lifting, 230 V AC (normally closed), for slightly aggressive gases and liquid fluids, without differential pressure, DN 50, kv= 41 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, damped operation, suitable for vacuum, body: stainless steel-1.4408, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override
2/2-way Solenoid valve - stainless steel, with force lifting, G 1/4" up to G 2", female/female, operating pressure: 0...10 bar, 24 V DC (normally closed) - for slightly aggressive gases and liquid fluids
2/2-way Solenoid valve -stainless steel, with force lifting, 24 V DC (normally closed), for slightly aggressive gases and liquid fluids, without differential pressure, DN 40, kv= 25 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, damped operation, suitable for vacuum, body: stainless steel-1.4408, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override
Pressure reducing valve, stainless steel, for aggressive water and fluids, Pressure reducing valve for aggressive water, aggressive fluids, compressed air and gases, pressure-relieved single seated valve, flanges acc. to DIN EN 1092 PN 40, with inside dirt-trap strainer, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: stainless steel-1.4408, bonnet: stainless steel-1.4408, diaphragm: FKM, seals: FKM, inlet pressure: max. 25 bar, outlet pressure: adjustable 1 up to 6 bar, minimum diff. pressure: 1 bar, Tmax= 75°C, kvs= 13 m3/h