Industrial valves - Strainer - 3-way - Pneumatically - 2"
2/2-way Solenoid valve - brass, indirectly solenoid actuated, G 1/4" up to G 2", PN16, female/female, operating pressure: 0,1...16/10 bar, 24 V DC (normally closed) - for neutral gases and liquids
2/2-way Solenoid valve -brass, 24 V DC (normally closed), indirectly solenoid actuated, for neutral gases and liquids, DN 50, kv= 41 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0, 1 up to 10 bar, IP 65, determined flow direction, damped operation, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override
2-way ball valve PVC-U, seats PTFE, female/female
2-way ball valve -PVC-U -female/female, full bore, T= 0 up to 60°C, threaded end connections acc. to DIN ISO 228, radial installation or removal, body: PVC-U, ball: PVC-U, seats: PTFE, stem seals: EPDM (on request: FPM)Pneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
Pressure reducing valve, with unions, Pressure reducing valve for water, non-viscous fluids and neutral and non-combustible gases, pressure-relieved single seated valve, threaded sockets acc. to ISO 7, with inside dirt-trap strainer, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: cast iron, diaphragm: NBR, seals: NBR, inlet pressure: max. 16 bar, outlet pressure: adjustable 1, 5 up to 6 bar, minimum diff. pressure: 1 bar, Tmax= 75°C, kvs= 13 m3/h
2-way ball valve - stainless steel, female/female
2-way ball valves -stainless steel -female/female, full bore, 3- piece design, T= -20 up to 150°C, threaded end connections acc. to DIN 2999, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE, handlever: stainless steel
2-way ball valve - brass, electr. operated (230 V AC)
2-way ball valve -brass -female/female -electr. operated (230 V), full bore, T= -10 up to 120°C, max. differential pressure: 10 bar, threaded end connections acc. to ISO7/1, body: brass- nickel plated, ball: stainless steel, stem: stainless steel, seats: PTFE+EPDM, stem seals: EPDM Electric actuator SR230A - 230 V ACwith 90° rotation, torque: 20 Nm, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 2, 5 W / powerconsumption in rest position: 0, 4 W, ambient temperature: 0°C up to 50°C, manual ovveride, optical position indicator, maintenance- free on request: limit switches for signal Open/Close, with potentiometer, IP 66/67, ...
2-way ball valve - brass, electr. operated (24 V)
2-way ball valve -brass -female/female -electr. operated (24 V), full bore, T= -10 up to 120°C, max. differential pressure: 10 bar, threaded end connections acc. to ISO7/1, body: brass- nickel plated, ball: stainless steel, stem: stainless steel, seats: PTFE+EPDM, stem seals: EPDM Electric actuator SR24A - 24 V AC/DCwith 90° rotation, torque: 20 Nm, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 2 W / powerconsumption in rest position: 0, 2 W, ambient temperature: 0°C up to 50°C, manual ovveride, optical position indicator, maintenance- free on request: limit switches for signal Open/Close, with potentiometer, IP 66/67, ...
2-way ball valve - stainless steel, female/female
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonPneumatic actuator - double actingtype 1BRD060, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2-way ball valve PVC-U, seats PTFE, female/female
2-way ball valve -PVC-U -female/female, full bore, T= 0 up to 60°C, threaded end connections acc. to DIN ISO 228, radial installation or removal, body: PVC-U, ball: PVC-U, seats: PTFE, stem seals: EPDM (on request: FPM)Pneumatic actuator - single actingcontrol pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
2-way control ball valve - brass, kvs=25 - electr. operated (24 V), 3-point
2-way control ball valve -brass -electr. operated (24 V), 3-point, kvs= 25 m3/h, flow characteristic: equal percentage, max. differential pressure: 3, 5 bar, leakage rate: A (air-bubble-tight), T= -10 bis 120°C, threaded end connections acc. to ISO7/1, body: brass-nickel plated, ball: stainless steel, seats: PTFE+Viton, stem: stainless steel, stem seals: EPDM, characterising disc: Tefzel Electric actuator SR24A - 24 V AC/DC, 3-pointIP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 2, 5 W / powerconsumption in rest position: 0, 2 W, ambient temperature: -30°C up to 50°C, manual ovveride, optical position indicator, maintenance- free on request: limit switches for signal Open/Close, with potentiometer, ...
2-way ball valve - brass, electr. operated
2-way ball valve -brass -female/female, full bore, T= 0 up to 110°C (for fluids), T= -20 up to 60°C (for gas), threaded end connections acc.to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE, stem seals: FKMElectric actuator 1AH020 - 230 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 85-240 V AC/DC, operating time: 11s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 01 A - 0, 21 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way ball valve - brass, electr. operated
2-way ball valve -brass -female/female, full bore, T= 0 up to 110°C (for fluids), T= -20 up to 60°C (for gas), threaded end connections acc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE, stem seals: FKMElectric actuator 1AL020 - 24 V AC/DCwith 90° rotation, torque: 20 Nm/25 Nm, 12-24 V AC/DC, operating time: 17s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 18 A - 2, 14 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way ball valve - stainless steel, female/female
2-way ball valve -stainless steel -female/female, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 M3, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - double actingtype 1BRD060, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2-way ball valve - brass - G 2 3/4", male/male, electr. operated (230 V)
2-way ball valve -brass -male/male -electr. operated (230 V), full bore, T= +5 up to 100°C, max. differential pressure: 10 bar, threaded end connections acc. to ISO228/1, body: brass- nickel plated, ball: stainless steel, stem: stainless steel, seats: PTFE+EPDM, stem seals: EPDM Electric actuator SR230A - 230 V ACwith 90° rotation, torque: 20 Nm, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 2, 5 W / powerconsumption in rest position: 0, 4 W, ambient temperature: 0°C up to 50°C, manual ovveride, optical position indicator, maintenance- free on request: limit switches for signal Open/Close, with potentiometer, IP 66/67, ...
2-way ball valve - brass - G 2 3/4", male/male, electr. operated (24 V)
2-way ball valve -brass -male/male -electr. operated (24 V), full bore, T= +5 up to 100°C, max. differential pressure: 10 bar, threaded end connections acc. to ISO228/1, body: brass- nickel plated, ball: stainless steel, stem: stainless steel, seats: PTFE+EPDM, stem seals: EPDM Electric actuator SR24A - 24 V AC/DCwith 90° rotation, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 2 W / power, consumption in rest position: 0, 2 W, ambient temperature: 0°C up to 50°C, manual ovveride, optical position indicator, maintenance- free on request: limit switches for signal Open/Close, with potentiometer, IP 66/67, ...
3-way ball valve - brass, T-bore, pneumatically operated (double acting)
3-way ball valve -brass with L-bore, L-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMPneumatic actuator - double actingtype 1BRD030, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
3-way ball valve - brass, L-bore, pneumatically operated (double acting)
3-way ball valve -brass with L-bore, L-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMPneumatic actuator - double actingtype 1BRD030, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2-way ball valve - stainless steel, female/female
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 150°C, threaded end connections acc. to ISO 7/1, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+Vitonapprovals: DVGW- approval for gases acc. to G260 and G262 up to 5 bar (MOP 5), TA LuftPneumatic actuator - double actingtype 1BRD060, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
Pressure reducing valve, female/female, for water and non-viscous fluids, Pressure reducing valve for water, non-viscous fluids and neutral and non-combustible gases, pressure-relieved single seated valve, threaded ends acc. to ISO 228, with inside dirt-trap strainer, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: cast iron, diaphragm: NBR, seals: NBR, inlet pressure: max. 25 bar, outlet pressure: adjustable 1, 5 up to 10 bar, minimum diff. pressure: 1 bar, Tmax= 75°C, kvs= 13 m3/h
2-way control ball valve - brass, kvs=25 - electr. operated (24 V), modulating
2-way control ball valve -brass, kvs= 25 m3/h, flow characteristic: equal percentage, max. differential pressure: 3, 5 bar, leakage rate: A (air-bubble-tight), T= -10 bis 120°C, threaded end connections acc. to ISO7/1, body: brass-nickel plated, ball: stainless steel, seats: PTFE+Viton, stem: stainless steel, stem seals: EPDM, characterising disc: Tefzel Electric actuator SR24A.SR - 24 V AC/DC, modulatingIP 54, plastic housing, PVC cable 1 m ( 4x0, 75 mm2), power consumption in operation: 2, 5 W / powerconsumption in rest position: 0, 4 W, ambient temperature: -30°C up to 50°C, manual ovveride, optical position indicator, maintenance- free on request: limit switches for signal Open/Close, with potentiometer, ...
2-way ball valve - stainless steel, female/female - with DVGW approval for drinking water (PN10)
2-way ball valve -stainless steel -with DVGW approval for drinking water (PN10), acc. to EN13828, full bore, 2-piece design, T= 0 up to 65°C, face to face acc. to DIN 3202-M3, threaded end connections acc. to ISO 7/1, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonPneumatic actuator - double actingtype 1BRD060, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)