Industrial valves - Steel - Stainless steel - DVGW drinkingwater
2-way ball valve - stainless steel, female/female - with DVGW approval for drinking water (PN10)
2-way ball valve -stainless steel -with DVGW approval for drinking water (PN10), acc. to EN13828, full bore, 2-piece design, T= 0 up to 65°C, face to face acc. to DIN 3202-M3, threaded end connections acc. to ISO 7/1, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+Viton, handlever: stainless steel
Pressure reducing valve, with unions, DVGW approval for drinking water, Pressure reducing valve for water, non-viscous fluids and neutral and non-combustible gases, pressure-relieved single seated valve, threaded sockets acc. to ISO 7, with inside dirt-trap strainer, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: PA6, diaphragm: NBR, seals: NBR, inlet pressure: max. 16 bar, outlet pressure: adjustable 1, 5 up to 6 bar, minimum diff. pressure: 1 bar, Tmax= 75°C, kvs=2, 9 m3/h
Drain cock - stainless steel", PN 6, male thread x hose nipple
Drain cock -stainless steel, male thread x hose nipple, max. 6 bar, T= -10° up to 50°C, bore: 2, 5 mm ; hose nipple: 9 mmbody: stainless steel-1.4571, handle: Polypropylene
3-way ball valve PVC-U, seats PTFE, female/female, L-bore
3-way ball valve -PVC-U -female/female, with L-bore, full bore, T= 0 up to 60°C, threaded end connections acc. to DIN ISO 228, radial installation or removal, body: PVC-U, ball: PVC-U, seats: PTFE, stem seals: EPDM (on request: FPM), handle: plastic (color red), with labelling system (colors: yellow, blue, green or red)
3-way ball valve PVC-U, seats PTFE, female/female, T-bore
3-way ball valve -PVC-U -female/female, with T-bore, full bore, T= 0 up to 60°C, threaded end connections acc. to DIN ISO 228, radial installation or removal, body: PVC-U, ball: PVC-U, seats: PTFE, stem seals: EPDM (on request: FPM), handle: plastic (color red), with labelling system (colors: yellow, blue, green or red)
Drain cock - stainless steel", PN 6, male thread x bent outlet
Drain cock -stainless steel, male thread x bent outlet, max. 6 bar, T= -10° up to 50°C, bore: 2, 5 mm body: stainless steel-1.4571, handle: Polypropylene
Manometer gauge valve acc. to DIN 16271 - stainless steel", male thread x sleeve
Manometer gauge valve acc. to DIN 16271 -stainless steel, male thread x sleeve, PN 400, T= up to 200°C, body: stainless steel-1.4571, stem: stainless steel-1.4571, stem sealing: Teflon, handwheel: Bakelitewith test connector M20x1, 5
Pressure reducing valve, female/female, for neutral gases, Pressure reducing valve for neutral and non-combustible gases, non-pressure-relieved single seated valve, threaded ends acc. to ISO 228, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: brass, diaphragm: NBR, seals: NBR, inlet pressure: max. 25 bar, outlet pressure: adjustable 1, 5 up to 8 bar, highest reduction ratio: 10:1, Tmax= 75°C, kvs=0, 5 m3/h
Pressure reducing valve, female/female, for water and non-viscous fluids, Pressure reducing valve for water, non-viscous fluids and neutral and non-combustible gases, pressure-relieved single seated valve, threaded ends acc. to ISO 228, with inside dirt-trap strainer, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: brass, diaphragm: NBR, seals: NBR, inlet pressure: max. 25 bar, outlet pressure: adjustable 1, 5 up to 10 bar, minimum diff. pressure: 1 bar, Tmax= 75°C, kvs=2, 9 m3/h
Manometer gauge valve acc. to DIN 16271 - stainless steel", male thread x sleeve
Manometer gauge valve acc. to DIN 16271 -stainless steel, male thread x sleeve, PN 400, T= up to 200°C, body: stainless steel-1.4571, stem: stainless steel-1.4571, stem sealing: Teflon, handwheel: Bakelitewith test flange 60 x 25 mm
Pressure reducing valve, female/female, for compressed air and neutral gases, Pressure reducing valve for neutral and non-combustible gases, non-pressure-relieved single seated valve, threaded ends acc. to ISO 228, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: brass, regulating piston: brass, seals: NBR, inlet pressure: max. 40 bar, outlet pressure: adjustable 1, 5 up to 20 bar, highest reduction ratio: 6:1, Tmax= 75°C, kvs=0, 5 m3/h
Pressure reducing valve, stainless steel, for aggressive water and fluids, Pressure reducing valve for aggressive water, aggressive fluids, compressed air and gases, pressure-relieved single seated valve, threaded ends acc. to ISO 228, with inside dirt-trap strainer, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: stainless steel-1.4408, bonnet: stainless steel-1.4408, diaphragm: FKM, seals: FKM, inlet pressure: max. 25 bar, outlet pressure: adjustable 1 up to 6 bar, minimum diff. pressure: 1 bar, Tmax= 75°C, kvs=2, 9 m3/h
Mini- ball valve - brass, PN 15, female/male
Mini-ball valve -brass -female/male, reduce bore, T= 0 up to 90°C, threaded end connections acc. to ISO 228/1, body: brass-nickel plated, ball: brass-chrome plated, seats: PTFE, stem seal: NBR, handle: nylon (color red)
Mini- ball valve - brass, PN 15, female/male
Mini-ball valve -brass -female/male, reduce bore, T= 0 up to 90°C, threaded end connections acc. to ISO 228/1, body: brass-nickel plated, ball: brass-chrome plated, seats: PTFE, stem seal: NBR, handle: nylon (color black)
Mini- ball valve - brass, PN 15, female/female
Mini-ball valve -brass -female/female, reduce bore, T= 0 up to 90°C, threaded end connections acc. to ISO 228/1, body: brass-nickel plated, ball: brass-chrome plated, seats: PTFE, stem seal: NBR, handle: nylon (color red)
Mini- ball valve - brass, PN 15, female/female
Mini-ball valve -brass -female/female, reduce bore, T= 0 up to 90°C, threaded end connections acc. to ISO 228/1, body: brass-nickel plated, ball: brass-chrome plated, seats: PTFE, stem seal: NBR, handle: nylon (color black)
Mini- ball valve - brass, female/female
Mini-ball valve -brass -female/female, reduce bore, T= -10 up to 90°C, threaded end connections acc. to ISO 228/1, body: brass-nickel plated, ball: brass-chrome plated, seats: PTFE, stem seal: NBR, handle: nylon (color black)
Mini- ball valve - brass, female/male
Mini-ball valve -brass -female/male, reduce bore, T= -10 up to 90°C, threaded end connections acc. to ISO 228/1, body: brass-nickel plated, ball: brass-chrome plated, seats: PTFE, stem seal: NBR, handle: nylon (color black)
Mini- ball valve - brass, female/male - handlever made of Aluminium
Mini-ball valve -brass -female/male, reduce bore, T= -10 up to 90°C, threaded end connections acc. to ISO 228/1, body: brass-nickel plated, ball: brass-chrome plated, seats: PTFE, stem seal: NBR, handle: Aluminium
Mini- ball valve - brass, female/female - handlever made of Aluminium
Mini-ball valve -brass -female/female, reduce bore, T= -10 up to 90°C, threaded end connections acc. to ISO 228/1, body: brass-nickel plated, ball: brass-chrome plated, seats: PTFE, stem seal: NBR, handle: Aluminium