Industrial valves - Strainer - 2-way - Manually - 1/2"
2/2-way Solenoid valve - brass, with force lifting, G 1/4" up to G 1/2", female/female, operating pressure: 0...10 bar, 230 V AC (normally closed) - for neutral gases and liquids
2/2-way Solenoid valve -brass, with force lifting, 230 V AC (normally closed), for neutral gases and liquids, without differential pressure, DN 10, kv= 1, 7 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: seat seal made of FPM or EPDM
2/2-way Solenoid valve - brass, with force lifting, G 1/4" up to G 1/2", female/female, operating pressure: 0...10 bar, 24 V DC (normally closed) - for neutral gases and liquids
2/2-way Solenoid valve -brass, with force lifting, 24 V DC (normally closed), for neutral gases and liquids, without differential pressure, DN 10, kv= 1, 7 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: seat seal made of FPM or EPDM
G 1/2", Preßluft - 0,2 bis 30 bar
,
Pressure reducing valve, female/female, for neutral gases, Pressure reducing valve for neutral and non-combustible gases, non-pressure-relieved single seated valve, threaded ends acc. to ISO 228, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: bronze-Rg5, bonnet: brass, diaphragm: NBR, seals: NBR, inlet pressure: max. 25 bar, outlet pressure: adjustable 1, 5 up to 8 bar, highest reduction ratio: 10:1, Tmax= 75°C, kvs=1, 2 m3/h
2-way ball valve - brass pneumatically operated (double acting)
2-way ball valve -brass -female/female, full bore, T= 0 up to 110°C (for fluids), T= -20 up to 60°C (for gas), threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE, stem seals: FKMPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2/2-way Solenoid valve - brass, with force lifting, G 1/4" up to G 2", female/female, operating pressure: 0...10 bar, 230 V AC (normally closed) - for neutral gases and liquids
2/2-way Solenoid valve -brass, with force lifting, 230 V AC (normally closed), for neutral gases and liquids, without differential pressure, DN 12, kv= 3, 4 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, damped operation, suitable for vacuum, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override
2/2-way Solenoid valve - brass, with force lifting, G 1/4" up to G 2", female/female, operating pressure: 0...10 bar, 24 V DC (normally closed) - for neutral gases and liquids
2/2-way Solenoid valve -brass, with force lifting, 24 V DC (normally closed), for neutral gases and liquids, without differential pressure, DN 12, kv= 3, 4 m3/h, T=-10 up to 90°C (fluid), operating pressure: 0 up to 10 bar, IP 65, determined flow direction, damped operation, suitable for vacuum, body: brass, seat seal: NBR, internal parts: stainless steel, PVDFon request: normally open (NO), seat seal made of FPM or EPDM, manual override
2-way ball valve - brass pneumatically operated (single acting)
2-way ball valve -brass -female/female -ISO mounting pad, full bore, T= 0 up to 110°C (for fluids), T= -20 up to 60°C (for gas), threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE, stem seals: FKM, with ISO 5211 mounting pad Pneumatic actuator - single actingcontrol pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
2-way ball valve - stainless steel, female/female
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
3-way ball valve - brass, T-bore, pneumatically operated (double acting)
3-way ball valve -brass with L-bore, L-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
3-way ball valve - brass, L-bore, pneumatically operated (double acting)
3-way ball valve -brass with L-bore, L-bore, T= -20 up to 120°C, sealed on all parts, not crossoverfree, threaded end connectionsacc. to ISO 228/1, body: brass-chrome plated, ball: brass-chrome plated, seats: PTFE/FKM, stem seals: FKMPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2-way stop valve - stainless steel", female/female
2-way Stop valve stainless steel -female/female -pneumatic actuator (single acting), mounting in any position, T= -10°C up to 180°C, ambient temperature: -10 up to 60°C, pressure range: 0-16 bar, threaded end connections acc. to ISO 228/1, body: stainless steel-1.4408, seat: PTFE, stem packing: PTFEPneumatic actuator - single acting (closing with flow direction)piston diameter= 40 mm, control pressure: 6-8 bar, actuator: stainless steelmedia: clean air (ISO 8573-1:2001)
2-way ball valve - stainless steel, female/female
2-way ball valve -stainless steel -female/female, full bore, 3- piece design, T= -20 up to 180°C, face to face acc. to DIN3202 M3, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2-way ball valve - brass, electr. operated (230 V AC)
2-way ball valve -brass -female/female -electr. operated (230 V), full bore, T= -10 up to 120°C, max. differential pressure: 10 bar, threaded end connections acc. to ISO7/1, body: brass- nickel plated, ball: stainless steel, stem: stainless steel, seats: PTFE+EPDM, stem seals: EPDM Electric actuator LR230A - 230 V ACwith 90° rotation, torque: 20 Nm, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 1, 5 W / powerconsumption in rest position: 0, 4 W, ambient temperature: 0°C up to 50°C, manual ovveride, optical position indicator, maintenance- free on request: limit switches for signal Open/Close, with potentiometer, IP 66/67, ...
2-way ball valve - brass, electr. operated (24 V)
2-way ball valve -brass -female/female -electr. operated (24 V), full bore, T= -10 up to 120°C, max. differential pressure: 10 bar, threaded end connections acc. to ISO7/1, body: brass- nickel plated, ball: stainless steel, stem: stainless steel, seats: PTFE+EPDM, stem seals: EPDM Electric actuator LR24A - 24 V AC/DCwith 90° rotation, torque: 20 Nm, operating time: 90 s, IP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 1 W / powerconsumption in rest position: 0, 2 W, ambient temperature: 0°C up to 50°C, manual ovveride, optical position indicator, maintenance- free on request: limit switches for signal Open/Close, with potentiometer, IP 66/67, ...
2-way ball valve - stainless steel, female/female
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 180°C, threaded end connections acc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+VitonPneumatic actuator - single actingType 1BRE015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
G 1/2"/ G1", für neutrale Flüssigkeiten
,
G 1/2"/ 1", Dampf/ Luft/ neutrale Gase
,
2-way control ball valve - brass, kvs=0,25 - electr. operated (24 V), 3-point
2-way control ball valve -brass -electr. operated (24 V), 3-point, kvs= 0, 25 m3/h, flow characteristic: equal percentage, max. differential pressure: 3, 5 bar, leakage rate: A (air-bubble-tight), T= -10 bis 120°C, threaded end connections acc. to ISO7/1, body: brass-nickel plated, ball: stainless steel, seats: PTFE+Viton, stem: stainless steel, stem seals: EPDM, characterising disc: Tefzel Electric actuator LR24A - 24 V AC/DC, 3-pointIP 54, plastic housing, PVC cable 1 m ( 3x0, 75 mm2), power consumption in operation: 1, 5 W / powerconsumption in rest position: 0, 2 W, ambient temperature: -30°C up to 50°C, manual ovveride, optical position indicator, maintenance- free on request: limit switches for signal Open/Close, with potentiometer, ...
3-way ball valve - stainless steel, L-bored
3-way ball valve -stainless steel with L-bore, reduce bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, threaded connectionacc. to DIN 2999, with mounting pad acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE+VitonPneumatic actuator - double actingtypr 1BRD015, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)