Industrial valves - Strainer - Steel - Pneumatically - DN 40 - Approval - Without approval
Strainer, Y-pattern, Cast steel
Strainer, Y-pattern, Cast steel -with flanges, face to face acc. to EN 558-1 row 1, mesh width: 1 mm body: GS-C25N, screen: stainless steel-1.4301, gasket: pure graphite
Strainer, Y-pattern, Cast steel with fine screen
Strainer, Y-pattern, Cast steel -with flanges, fine screen, face to face acc. to EN 558-1 row 1, mesh width: 0, 25 mm body: GS-C25N, screen: stainless steel-1.4301, gasket: pure graphite
2-way wafer-type ball valve - steel pneumatically operated (double acting)
2-way ball valve -wafer type -steel, full bore, T= -20 up to 180°C, flanges with threaded holes (metric), body: A105 or 1.0570, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, approvals: DVGW- approval for gases up to PN 16 acc. to G260, TA- Luft, Fire-SafePneumatic actuator - double actingtype 1BRD030, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2-way Flange ball valve - steel pneumatically operated (double acting)
2-way ball valve -flange type -steel, split body, full bore, T= -20 up to 180°C, face to face acc. to EN 558-1 row 27, body: A105 or 1.0570, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, approvals: DVGW- approval for gases up to PN 16 acc. to G260, TA- Luft, Fire-SafePneumatic actuator - double actingtype 1BRD030, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2-way wafer-type ball valve - steel pneumatically operated (single acting)
2-way ball valve -wafer type -steel, full bore, T= -20 up to 180°C, flanges with threaded holes (metric) , body: A105 or 1.0570, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, approvals: DVGW- approval for gases up to PN 16 acc. to G260, TA- Luft, Fire-SafePneumatic actuator - single actingTyp 1BRE100. control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
3-way wafer-type ball valve - steel, L-bored
3-way ball valve -wafer type -steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, Pneumatic actuator - double actingTyp 1BRD060, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
3-way wafer-type ball valve - steel, T-bored
3-way ball valve -wafer type -steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKMPlease note the flow direction !Pneumatic actuator - double actingtype 1BRD060, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001)
2-way Flange ball valve - steel pneumatically operated (single acting)
2-way ball valve -flange type -steel, split body, full bore, T= -20 up to 180°C, face to face acc. to EN 558-1 row 27, body: A105 or 1.0570, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, approvals: DVGW- approval for gases up to PN 16 acc. to G260, TA- Luft, Fire-SafePneumatic actuator - single actingType 1BRE100, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
3-way wafer-type ball valve - steel, L-bored
3-way ball valve -wafer type -steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKMPneumatic actuator - single actingType 1BRE100, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
3-way wafer-type ball valve - steel, T-bored
3-way ball valve -wafer type -steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKMPlease note the flow direction !Pneumatic actuator - single actingType 1BRE100, control pressure: 6-8 bar (other control pressure on request), temperature: -20°C up to 80°C, media: clean air (ISO 8573-1:2001), function: spring close (on request: spring open)
2-way Flange ball valve - steel electrically operated (24 V)
2-way ball valve -flange type -steel, split body, full bore, T= -20 up to 180°C, face to face acc. to EN 558-1 row 27, body: A105 or 1.0570, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKMapprovals: DVGW- approval for gases up to PN 16 acc. to G260, TA- Luft, Fire-SafeElectric actuator 1AL035 - 24 V AC/DCwith 90° rotation, torque: 35 Nm/38 Nm, 12-24 V AC/DC, operating time: 12 s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 33 A - 3, 23 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
Stop valve - cast steel, with bellow seal - straightway form
Stop valve Cast steel -with bellow seal, straightway form, maintenance-free, metallic seat, Tmax=450°C (22, 2 bar), face to face acc. to EN 558-1 row 1, double wall bellow seal, with throttling plug, Lubricating nipple as locking device, secondary sealing: gland packing, position indicator, body: cast steel-1.0619+N, bonnet: C22.8/GS-C25N, stem: stainless steel-1.4021, plug/seat: stainless steel-1.4021, bellow: stainless steel-1.4571, with handw
2-way wafer-type ball valve - steel electrically operated (230 V)
2-way ball valve -wafer type -steel, full bore, T= -20 up to 180°C, flanges with threaded holes (metric) , body: A105 or 1.0570, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, approvals: DVGW- approval for gases up to PN 16 acc. to G260, TA- Luft, Fire-SafeElectric actuator 1AH055 - 230 V AC/DCwith 90° rotation, torque: 55 Nm/ 60 Nm, 85-240 V AC/DC, operating time: 14s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 04 A - 0, 31 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way wafer-type ball valve - steel electrically operated (24 V)
2-way ball valve -wafer type -steel, full bore, T= -20 up to 180°C, flanges with threaded holes (metric) , body: A105 or 1.0570, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, approvals: DVGW- approval for gases up to PN 16 acc. to G260, TA- Luft, Fire-SafeElectric actuator 1AL055 - 24 V AC/DCwith 90° rotation, torque: 55 Nm/60 Nm, 12-24 V AC/DC, operating time: 16 s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 33 A - 4, 12 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way Flange ball valve - steel electrically operated (230 V)
2-way ball valve -flange type -steel, split body, full bore, T= -20 up to 180°C, face to face acc. to EN 558-1 row 27, body: A105 or 1.0570, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKMapprovals: DVGW- approval for gases up to PN 16 acc. to G260, TA- Luft, Fire-SafeElectric actuator 1AH055 - 230 V AC/DCwith 90° rotation, torque: 55 Nm/ 60 Nm, 85-240 V AC/DC, operating time: 14s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 04 A - 0, 31 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
3-way wafer-type ball valve - steel, L-bored - electrically operated (230 V)
?,
3-way wafer-type ball valve - steel, T-bored - electrically operated (230 V)
3-way ball valve -wafer type -steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKMPlease note the flow direction !Electric actuator 1AH055 - 230 V AC/DCwith 90° rotation, torque: 55 Nm/ 60 Nm, 85-240 V AC/DC, operating time: 14s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 04 A - 0, 31 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
3-way wafer-type ball valve - steel, L-bored - electrically operated (24 V)
3-way ball valve -wafer type -steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKM, Electric actuator 1AL055 - 24 V AC/DCwith 90° rotation, torque: 55 Nm/60 Nm, 12-24 V AC/DC, operating time: 16 s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 33 A - 4, 12 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
3-way wafer-type ball valve - steel, T-bored - electrically operated (24 V)
3-way ball valve -wafer type -steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: A105, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKMPlease note the flow direction !Electric actuator 1AL055 - 24 V AC/DCwith 90° rotation, torque: 55 Nm/60 Nm, 12-24 V AC/DC, operating time: 16 s, IP 67, -20°C up to 70°C, duty: 75%, min/max. current: 0, 33 A - 4, 12 A, heater: 4 W, plastic housing (Nylon PA6), electronic torque limiting, optical position indicator, two limit switches for signal Open/Close, manual override
2-way wafer-type ball valve - steel electrically operated (230 V)
2-way ball valve -wafer type -steel, full bore, T= -20 up to 180°C, flanges with threaded holes (metric) , body: A105 or 1.0570, ball: stainless steel-1.4301, seats: PTFE, stem seals: PTFE+FKMapprovals: DVGW- approval for gases up to PN 16 acc. to G260, TA- Luft, Fire-Safe