Industrial valves - Manually
3- way ball valve - stainless steel, T-bore
3-way ball valve -stainless steel with T-bore, reduce bore, T= -20 up to 180°C, sealed on all ports, not overcutting free, threaded connection acc. to DIN 2999, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE, handlever: stainless steel (lockable)
Manometer gauge valve acc. to DIN 16270 - stainless steel", male thread x sleeve
Manometer gauge valve acc. to DIN 16270 -stainless steel, male thread x sleeve, PN 400, Tmax= up to 200°C, body: stainless steel-1.4571, stem: stainless steel-1.4571, stem sealing: Teflon, handwheel: Bakelite
Needle valve - stainless steel, female/female
Needle valve -stainless steel -female/female, straightway form, Tmax=250°C ( Please note: T > 50°C - pressure reduction), seat diameter: 4 mm, body: stainless steel-1.4571, stem: stainless steel-1.4571, stem sealing: PTFE, handwheel: plastic
2-way wafer-type ball valve - stainless steel ISO-mounting pad
2-way ball valve -wafer type -stainless steel, full bore, T= -20 up to 180°C, flanges with threaded holes (metric), mounting flange acc. to DIN ISO 5211, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+Viton, handlever: stainless steel (lockable)
2-way Flange ball valve - stainless steel
2-way ball valve -flange type -stainless steel, split body, full bore, T= -20 up to 180°C, face to face acc. to EN 558-1 row 27, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: RTFE, stem seals: PTFE, handlever: stainless steel (lockable)
Drain cock - stainless steel", PN 6, male thread x hose nipple
Drain cock -stainless steel, male thread x hose nipple, max. 6 bar, T= -10° up to 50°C, bore: 2, 5 mm ; hose nipple: 9 mmbody: stainless steel-1.4571, handle: Polypropylene
Drain cock - stainless steel", PN 6, male thread x bent outlet
Drain cock -stainless steel, male thread x bent outlet, max. 6 bar, T= -10° up to 50°C, bore: 2, 5 mm body: stainless steel-1.4571, handle: Polypropylene
Manometer gauge valve acc. to DIN 16271 - stainless steel", male thread x sleeve
Manometer gauge valve acc. to DIN 16271 -stainless steel, male thread x sleeve, PN 400, T= up to 200°C, body: stainless steel-1.4571, stem: stainless steel-1.4571, stem sealing: Teflon, handwheel: Bakelitewith test connector M20x1, 5
2-way Flange ball valve - stainless steel
2-way ball valve -flange type -stainless steel, 3- piece design, full bore, T= -20 up to 180°C, face to face acc. to EN 558-1 Reihe 1, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE+15%gf, stem seal: PTFE, handlever: stainless steel
Manometer gauge valve acc. to DIN 16271 - stainless steel", male thread x sleeve
Manometer gauge valve acc. to DIN 16271 -stainless steel, male thread x sleeve, PN 400, T= up to 200°C, body: stainless steel-1.4571, stem: stainless steel-1.4571, stem sealing: Teflon, handwheel: Bakelitewith test flange 60 x 25 mm
2-way ball valve - stainless steel, butt weld
2-way ball valves -stainless steel -butt weld, full bore, 2- piece design, anti-static device, T= -20 up to 180°C, butt weld ANSI B16.25, body: stainless steel-1.4404, ball: stainless steel-1.4404, seats: PTFE, stem seal: PTFE, handle: steel-zinc plated
DN 15, Flansch/Verschlußkappe
,
3-way wafer-type ball valve - stainless steel/40, L-bored
3-way ball valve -wafer type -stainless steel, L-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: stainless steel-1.4401/1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seals: PTFE+FKM, handlever: stainless steel
3-way wafer-type ball valve - stainless steel/40, T-bored
3-way ball valve -wafer type -stainless steel, T-bored, reduced bore, T= -20 up to 180°C, body with threaded holes (metric) , body: stainless steel-1.4401/1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seals: PTFE+FKM, handlever: stainless steel, Please note the flow direction !
2-way ball valve - stainless steel, female/female - with DVGW approval for gases (MOP5)
2-way ball valves -stainless steel -female/female, full bore, 2- piece design, T= -20 up to 150°C, threaded end connections acc. to ISO 7/1, body: stainless steel-1.4408, ball: stainless steel-1.4408, seats: PTFE, stem seal: PTFE+Viton, handlever: stainless steel, approvals: DVGW- approval for gases acc. to G260 and G262 up to 5 bar (MOP 5), TA Luft
Pressure reducing valve, stainless steel, for aggressive water and fluids, Pressure reducing valve for aggressive water, aggressive fluids, compressed air and gases, pressure-relieved single seated valve, threaded ends acc. to ISO 228, with inside dirt-trap strainer, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: stainless steel-1.4408, bonnet: stainless steel-1.4408, diaphragm: FKM, seals: FKM, inlet pressure: max. 25 bar, outlet pressure: adjustable 1 up to 6 bar, minimum diff. pressure: 1 bar, Tmax= 75°C, kvs=2, 9 m3/h
High performance butterfly valve - wafer type, stainless steel/1.4404/RTFE
High performance butterfly valve -wafer type -stainless/PTFE, double eccentric construction, face to face acc. to EN 558-1 row 20, to be mounted between two flanges acc. to DIN EN 1092-1/11/B1 (PN10/PN16/PN25/PN40), max. working pressure: 40 bar, working temperature: -50 up to 200°C, body: stainless steel-1.4408, disc: stainless steel-1.4404, stem: Duplex-1.4462, seat: RTFE, stem sealing: Graphite, with handlever (gearbox on request)
Double offset butterfly valve - wafer type, stainless steel/1.4404/RTFE
High performance butterfly valve -lug type -stainless/PTFE, double eccentric construction, face to face acc. to EN 558-1 row 20, to be mounted between two flanges acc. to DIN EN 1092-1/11/B1, max. working pressure: 40 bar, working temperature: -50 up to 200°C, body: stainless steel-1.4408, disc: stainless steel-1.4404, stem: Duplex-1.4462, seat: RTFE, stem sealing: Graphite, with handlever (gearbox on request)
Pressure reducing valve, stainless steel, for aggressive water and fluids, Pressure reducing valve for aggressive water, aggressive fluids, compressed air and gases, pressure-relieved single seated valve, flanges acc. to DIN EN 1092 PN 40, with inside dirt-trap strainer, inner parts are replacable, connections G 1/4'' for gauge on both sides, body: stainless steel-1.4408, bonnet: stainless steel-1.4408, diaphragm: FKM, seals: FKM, inlet pressure: max. 25 bar, outlet pressure: adjustable 1 up to 6 bar, minimum diff. pressure: 1 bar, Tmax= 75°C, kvs=2, 9 m3/h
High performance butterfly valve - wafer type, stainless steel/metal to metal seat
High performance butterfly valve -wafer type -stainless/metal-metal seat, double eccentric construction, face to face acc. to EN 558-1 row 20, to be mounted between two flanges acc. to DIN EN 1092-1/11/B1 (PN10/PN16/PN25), max. working pressure: 25 bar, working temperature: -100 up to 500°C, body: stainless steel-1.4408, disc: stainless steel-1.4404 (nickel plated), stem: Duplex-1.4462, seat: Inconel 718, stem sealing: Graphite, with handlever (gearbox on request)